1993 Buick Century "back door" Questions

Ad

...back door itself. I continued depressing and than slammed the door and the windown went down and now cannot get the window to go back up. I removed the switch and tried on the other back door and it ...

Ad

back driver side door the radio will go back to doing what it was doing then i mess with it again and it stops i have no idea. You are on the right track...the problem appears to be on the driver side

Ad

Question about Buick Century

1 Answer

...door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the ...

Question about Buick Century

1 Answer

93 buick interior light Where is the interior light switch located for the front doors and a 4-door sedan? The back door switches work fine built in to the latch in side the door

...door card off using a screw driver and popping the clips out, peel back the plastic cover enough for you to see, use a torch to see where it has popped off and clip it back in, if you try using the ...

Question about Buick Century

1 Answer

door panel and put the window back on its track? The window regulator is broken Windows do not go off track Just like your back doesn't go out You remove a couple screws around the door handle You

...back window is not working, how can I see the inside of the door? I would really like a diagram of the inside of my door but can't find one. the inside of the door comes off theres tabs that hold it ...

...door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the ...

...do take the door skin off of the inside of the door and at the top corner there will be i think three nuts and than your going to need door clips after your done in order to put the door panal back ...

Question about Buick Century

1 Answer

...back. drivers side does not work The switch plug(s) are either unplugged behind the door panel, or there is a broken/pinched wire in the covered bundle that winds into door from B-pillar (in space ...

Not finding what you are looking for?
1993 Buick Century Logo

499 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...