1991 Buick Regal "car start making clanking sound" Questions

start or turn off my car whith the belt off theres a single clank noise. It sound to me like you have a bad belt tentioner check to see if it's real easy to move by hand if so change it problem solved

...Car had been making small noises from area around fan belt the day before. Engine died shortly after starting and now will not start. Diesel or Petrol?Any warning lights on on the dash?Oil pump ...

...car and the low oil pressure light came on . After that i heard a metal clank sound then this ticking Better get a mechanic to check it out before you drive it very much. Could be a lifter or piston ...

...clanking or tapping noise,if this has started after trans fluid change,then check the lines running from the trani to radiator sometimes the service person might bang into something causing plastic ...

...start until 5 or 6 gear. Sometimes it starts right away in 1 gear. It can happen in low rpms or mid or high, never know. But CLANKING is loud and violent sounding and isnt good at all. Note, axle has ...

...clanking noises when i start it up. never did this before. stopped driving it. last week started it up and it didnt make this sound. three days later it came back..what do you suggest? could be a ...

...minimal at first and has become extreme. Coming from underneath somewhere in the middle of the undercarriage. Once at a higher speed, the clanking sometimes stops but once stopping and accelerating, ...

...clanking sound from engine, sounds like valves? lifters make more of a ticking sound...right? dont really know were to start added lucas oil stuff to engine didnt seem to help much valves do not ...

...is the motor won't start. The clanking sound you're hearing is possibly the starter bolts may have backed out of the starter. I hope this get you going again soon. Jesus loves you, John 3:16-17

making a clanking sound yesterday when backing up If it makes a clanking sound when you switch from neutral to drive or neural to reverse than i would say you have a u-joint issue. If it you get noise