...Does anyone know how to access the radio to replace a burned out light? no, there is no way to replace them as they are LCD lights soldered to the mother board, you will have to replace the
Question about Chevrolet Malibu
replace the radio with one that is compatible with my iphone. I am worried that my remote to unlock my car will no longer work after replacing the radio. Is this true? Will my remote not unlock my car
...or if it is an aftermarket radio, pull the radio out and find the fuse sticking out the back and ...
Radio fuse keeps blowing I replace the fuse and it keeps blowing. make sure fuse is the right one amp wise, if so uninstall radio and try fuse again to see if it blows. if not radio at fault also ...
...not turn on or doors won't ding. Checked the fuse boxes..found the blown fuse for the radio and replaced it and the car will ding and the radio will turn on for a split second, then it wont work ...
...replace ignition You first pop off the ignition ring (black part) then take off the center dash trim around the radio (grey plastic) un plug the lighter remove two 5/16 screws that hold the radio in ...
...replace. new radio worked till i tried to put back in dash, now neither radio works. all fuses are good. i will bet that if you closely examine the car's wiring harness you will find where you ...
replace my radio but keep my mileage and information screen, how can I do this. assuming info screen is in the factory radio couple ways of doing this first and easiest is leave factory radio in place
Question about Chevrolet Malibu
replaced battery and now radio does't work and sounds don't work Lost radio and turn signal sounds and clock after replacing battery. the radio will need a code before it will work again. the rest may
1,923 questions posted
Usually answered in minutes!
1,306 Questions
1,094 Questions
1,067 Questions
997 Questions
1,026 Questions