2004 Mitsubishi Endeavor "put door handles" Questions

Ad

Question about Mitsubishi Endeavor

2 Answers

...door, it is the latch, dealership wants 150 for new one, don't buy it, open up old one and if u notice a tiny piece of metal that makes contact with a chip(has the wires coming out of it), clean the ...

Ad

Question about Cars & Trucks

1 Answer

...Put a flat screwdriver around the door Wall to lever out the plastic fittings. Pull the door wall down and you now can see the door handle from the inside where you will find two screws that hold the ...

Ad

Question about Mitsubishi Endeavor

1 Answer

...door lock lever.Put on the new lock and put it all back together. Be sure to test it as you go. I had to turn the lock cable to the inner door lock lever 180 degrees because it was not unlocking ...

Question about Mitsubishi Endeavor

2 Answers

door remove panel,put window up,locate and remove fastner behind door handle,install opposite. You have to take the inner door panel off to get to the mounting nuts for the outside door handle. Remove

Question about Mitsubishi Endeavor

1 Answer

...the door and then their will be two bolts holding the handle from inside the door their will also be metal pins tha run through the handle these need to be put back on properly else the door wont ...

Question about Mitsubishi Endeavor

1 Answer

...flossing in between teeth. When you are ready to put the handle back on the door, just put the wire clip back into the grooves on the winder handle & simply push the handle back onto the

...door) it'll put less strain on the handle n save you some trouble / frustraition/ cash in the future=D I have the same prob with my doors both sides, i am looking into setting the door handles in ...

Question about Mitsubishi Endeavor

1 Answer

...a new door and put it on. I wouldn't go through the trouble of taking the door apart to put on a new handle when you can probably get a whole new door for around the same price :) Best Regards, ...

...put your new door handle on your vehicle you have to take the inner panel off, then disconnect the screws and pins to replace. Be sure to put everything back the way it was so you don't get any ...

Question about Mitsubishi Endeavor

1 Answer

...are holding the door handle in. then take the handle out and put the new one in and put it back together. or just go down and get a repair manual at your local auto parts store for less then 20 ...

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

1,126 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...