2003 Mitsubishi Diamante "remove headlight bulb" Questions

Ad

Question about Mitsubishi Diamante

1 Answer

...headlight bulb assembly in the rear of the headlight housing. then release the wire keeper and the bulb assembly comes out of the rear of the headlight housing and you can change the bulb. do not ...

Ad

...cover, before you can remove the bulb you have to take the wiring plug off by pressing the tags on the sides of the plastic plug, then the bulb will be held in by a wire spring clip... hope this ...

Ad

Question about Mitsubishi Diamante

1 Answer

...remove the right hand side from parklight bulb from the headlight of a 2003 Mitsubishi Diamante open the trunk then twist open the lock cover thats in front of the light u want to change then change ...

Question about Mitsubishi Diamante

1 Answer

...Remove the three bolts and the headlight assembly. Disconnect the electrical connector. Remove the cover from the rear of the headlight assembly. If equipped with HID, release the spring tabs to ...

Question about Mitsubishi Diamante

1 Answer

...Remove the headlight assembly. Remove the headlight bulb: Remove the headlight bulb(s) with a counterclockwise turn-Santa Fe. Remove the headlight bulb after removing the bulb caps (A)-Veracruz. ...

...remove the headlight bulb. Find the hood release handle and activate it, the hood should pop open. Once the hood is popped open locate the hood secondary or safety latch and release it. Then finish ...

Question about Mitsubishi Diamante

1 Answer

...Remove the headlight sealing cover(s) Fig. 7: Remove the attaching spring and pull out the bulb To install: Install the bulb into the headlight module. Install the bulb attaching spring. Install the ...

Question about Mitsubishi Diamante

3 Answers

...remove headlight . There are few troubleshooting help links showing how to replace car headlights,i suggest you to refer the links to solve these issue. -------- Click the link below:------ How to ...

Question about Mitsubishi Diamante

1 Answer

...remove the bulb from the headlight housing. To Install: CAUTION Do not touch the glass portion of the new bulb with bare hands. Insert the bulb in the housing. Secure the bulb with spring clip. ...

remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver. Unplug the wire from the ballast, and then remove the

Not finding what you are looking for?
2003 Mitsubishi Diamante Logo

259 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...