2001 Mitsubishi Eclipse "test neutral safety switch" Questions

...neutral safety switch ,which is on the trany shifter.you have an automatic trans i assume. If so try putting in neutral when cranking. The same symptoms can be caused by a faulty starter relay. Its ...

...Surely sounds like a Neutral Safety switch issue. A quick test is to see if when in Park or Neutral it has the same RPM Limit as your experiance the rest of the time. Hope this helps, let me

...that spot. Again the neutral switch. I always do this before I break out with the test equipment. But make sure the emergency brake is set and stand on the brake pedal! Just in case it starts in ...

... Worn, Loose, Cracked, or Incorrectly Installed Distributor Cap. 21 Inspect Distributor Rotor -- Worn, Loose, Burnt contact surface 22 Test/Inspect Neutral Safety Switch -- Faulty Neutral Safety ...

...circuit is good. Make sure the car is in neutral before getting into the relay socket. use a meter and test the battery --starter and ignition switch --looking and hand checking is not ...

...How to fix your NSS Neutral Safety Switch How To Test and Replace the Neutral Safety Swtich Inhibitor Switch P0705 Neutral Safety ...

...neutral safety switch that will have the the signal from the ignition switch for the start signal. ( Test this yellow wire with a test light while holding the key in the start position to see if it ...

...test the neutral safety circuit. I have provided you with an image to help assist you adjust the neutral safety switch. So the starter wont even spin. Think about it. logic ditates that if it started ...

...Test and Replace the Neutral Safety Swtich ... ? 11:39 https://www.youtube.com/watch?v=r8QJX-MWkBU Feb 11, 2014 - Uploaded by CarsNToys ... http://carsntoys.net How to test an inhibitor switch or ...

...test also tests the adjustment of the neutral safety switch. If the engine does not start in either or both of these positions, the neutral safety switch or the gear selector linkage needs adjustment ...