2000 Mitsubishi Eclipse "cable latch open hood" Questions

cable going into the latch that holds the hood shut. If you can get ahold of the cable with your hand or something to hold the cable. Give the cable a firm pull towards the left fender ( driver's side

...cable broke how do I release the hood latch With quite some (intentional) difficulty and a long screwdriver, you can access the latch mechanism from underneath and behind the front bumper. Underskirt ...

...latch cable is broken how can i open the hood This happened to my 2003 mitsubishi Galant... We wound up having to use some cable cutters and cut the cable, then pull the cable out through one of the ...

cable running into the latch assembly dead center of the hood area, take your screw driver and try to move the lever back(the one the cable is attached to) that should open the hood. Hope this helps!!

...cable is not broken I've checked everything on the inside of the car, I cannot get it to pop, is there another way of releasing it from the outside of the car? Pull the Release again and go to the ...

...latch cable is broken I pulled too hard in the cable and it broke. Is there anyway to open the hood. one way would be to take off the bumber and pry it open. these cars should have back up plans but ...

...latch in car still pulls like always and the hood outside you can hear it click, but hood will not open! suggest you lube the locking switch under the hood with wd40.also lube the pull handle under ...

...latch manually? Try to remember and visualize the cable routing. Since the cable is no longer connected to the pull handle and broken off inside the engine compartment make up a hook from a coat ...

...latch cable broke under the hood how can i open it Saturn Vue hood release can be opened (if the cable is not broken) by disconnecting the cable from the back of the release lever, grabbing the ball ...

...hood latch cable need to open hood, but release cable is broken. how do you open hood? On hood latch..where cable goes in..there is a hole there..trip it back..or take the 3 bolts away from ...