1999 Mitsubishi Galant "thin wall spark plug socket" Questions

...plug hole, as the hole on the engine is very thin. you need a special socket for your car. its deep socket with thin wall. what i did was to bring my socket to a machine shop and made my tool ...

...etc and ask for a spark plug socket... You can also just use a thin wall deep socket, there are several different sizes of spark plugs... Use the spark plug wire once you loosen the spark

EXTENSION WITH SPARK SOCKET.YOU ALSO CAN BUY LONGER SPARK PLUG SOCKET AT ANY AUTO PARTS STORE OR SNAP ON HAS IT. No, you just need a thin walled socket to do the job. Not a lot of wiggle room in there

thin walled for the irridium plugs.You can find the tool mentioned on eBay, it has a special clip to retain the plug as you extract & insert it.Mercedes M156 engine, Peugeot 207 and 307, Renault 1

...won't go all the way in. There is a specialty tool that you can purchase at most auto parts stores. It's a thin wall 5/8, with a swivel and t handle. You may be able to find a thin wall socket as ...

thin wall socket;;;or a regular socket on a spark plug one Jack up the front end leaving the wheel on the ground turned entirely leftward. This will allow access to the #8 plug through the wheel well.

...thin wall or extra thin wall socket to do this do you have any ideas also is there such a thing as a long tap that would stick out of the hole to be able to get a socket on it, Thanks use a product ...

the hole the coil pack caame out of. you'll need a thin wall socket and a extension for your ratchet. Go to the auto parts store get the plugs and ask them for the socket. Change them all. Best to you

...holes. You will need a good spark plug socket (preferably a thin wall socket) and a 6" or 12" extension. This is actually a very easy job, and can be completed in less than an hour. Hope this

...THIN WALLED 5/8in spark plug socket, at least one extension, and on the #3,4,7, and 8 spark plugs you'll need a universal joint. the holes that the spark plugs are in are machined very thght and I ...