1997 Mitsubishi Galant "pole solenoid wiring" Questions

...to locate the starter follow positive wire from the battery pole. it is connected to the solenoid of the starter. from there you can locate the bolts and nuts that secures the starter to the

pole will tie into the reverse light wiring which will energize a solenoid that releases the surge brakes on my boat trailer so that I can back up. What is the easiest way to get to this wire and what

Thought it was the connection to the solenoid. If I tapped it, or if I jumped across the 2 solenoid poles the car would start. Was very erratic, it would start then it wouldn't. Now nothing I do works

...becoming an electromagnet, this does two things, 1 engages with the engine 2 connects the two heavy poles to spin the starter and start the engine . Check you have refitted the wires ...

...wiring problem or broken (thin wire) from ignition switch to the solenoid. If ignition switch is wired correctly, check if power is transfered from one of the thicker wires to the thin wire feeding ...

...solenoid itself is bad(Check the wiring with known good pictures of the assembly and then use an inspection mirror to check that the wiring is securely mounted and then go from there(starter draw ...

solenoid on the starter with one big wire from battery (and sometimes other hot wires are hooked up here), one goes to the starter pole on the ignition switch on older models, and one goes to the coil

how to wire starter solenoid? It has 2 poles dont know what wires to hook to each one? Is it like this??? B-battery S-ignition switch

...You have a wire going into your starter in the opposite side of the starter. There should be 2 poles where you connect wires. The only one that goes to one pole is the heavy gauge wire coming ...

...solenoid S pole to terminal on the starter motor solenoid We typically call this the start wire, but there is no certain name for it. Just make sure it is the proper gauge wire for the solenoid. 14 ...