1997 Mitsubishi Diamante "ignition switch removal" Questions

Ad

...by the ignition switch. You will need to trace the wire back from the starter or check the ignition switch, the ignition switch should spring back whenever you let go of the key. I would start

Ad

Question about Mitsubishi Diamante

2 Answers

ignition switch it might be interanly stuck on the on position In order to shut the vehicle you would have to cut fuel supply off...not electric (battery) supply. Pull fuse to fuel pump next time...it

Ad

Question about Mitsubishi Diamante

1 Answer

...ignition switch 4.loose connection at any of the points5 faulty starter relay. the battery can be removed and taken to most any parts store and checked. likewise with the starter/cylinoid. checking ...

Question about Mitsubishi Diamante

1 Answer

ignition switch (smashed). A srewdriver seems to work fine in what is left of ignition & other wiring seems intact. With screwdriver I get acc (dashlights etc) then motor turns over & over but

Question about Mitsubishi Diamante

1 Answer

...Ignition Switch Lock Cylinder Removal Remove the steering wheel (3600). Refer to the procedure in this section. Remove the four lower steering column shroud screws. Separate the upper and lower ...

Question about Mitsubishi Diamante

1 Answer

ignition switch I have a mercury tracer and my ignition switch broke i need to replace it is there a menial on how to replace it? Remove the turn signal and windshield wiper switch. Disconnect the ...

Question about Mitsubishi Diamante

1 Answer

...IGNITION SWITCH AND LOCK CYLINDER REPLACEMENT 1. Disconnect battery 2. Disable Supplemental Restraint System (Airbags) 3. Remove traction control switch from rear of center console plate 4. Open ...

Question about Mitsubishi Diamante

1 Answer

...ignition switch what year? 1999 electrcial ign switch. Lock cylinder is different 211-05: Steering Column Switches 1999 Town Car Workshop Manual REMOVAL AND INSTALLATION Ignition Switch Removal ...

Question about Mitsubishi Diamante

1 Answer

...Ignition Switch itself (THE ELECTRICAL SWITCH) I think that is where you should Look. On these models, the ignition lock and ignition switch are removed as an assembly. Refer to IGNITION LOCK . ...

Question about Mitsubishi Diamante

1 Answer

...Ignition Switch Lock Cylinder Removal WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR DRIVER SIDE AIR BAG MODULE DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY. TO AVOID ACCIDENTAL DEPLOYMENT AND ...

Not finding what you are looking for?
1997 Mitsubishi Diamante Logo

174 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...