...put a turbo in to my 1996 mitsubishi eclipse rs??? Im going to guess that you have the 420A engine 2.0L 4cyl non-turbo engine. They make the turbos for your car for the ones that come with a stock ...
Question about Mitsubishi Eclipse
What are the mods I need to make to my 97 eclipse 2.0 non-turbo before I start to mess with compression to put turbo on???? Nothing. Once you put the Turbo on you will detonate the engine.
...put in the 2.0L with MFI-Turbo it puts out 190 horsepower @ 6000rpm. if you swap in the turbo 2.0 4g63 your gonna need a turbo trans. the non-turbo wont work and he motor mounts should bolt up the ...
...put a 2.0 turbo in it If your planing on swaping the 2.0 non-turbo(420a) to the 2.0 turbo(4g63t) your problem will be that the motor and transmission are on opposite side of one another. My GST has ...
...put tension on the power steering belt. 1996 2.0 engine I'm assuming you have a turbo engine because the turbo motors don't have a tensioner for the power steering. Just get a prybar or big ...
turbo or not but put in four and check it with the stick. You did'nt say if your changing the filter. you didn't say if this is a freash build ture empty or just coming in for regular service? Oil and
Question about Mitsubishi Eclipse
...turbo car the power steering pump is on the front right hand side. all you need to do is put the belt back on and apply pressure til the belt is tight then tighten up the bolts that hold the power ...
put a new headgasket set on my 97 eclipse 2.0 non turbo motor and i need to know how to set the timing, thank you in advance.. if you go to autozone.com you will gain access to the free manuals online
Question about Mitsubishi Eclipse
...put new filter an oil, but now i hear a valve or lifter . any ideas? Have you carried out any repair as yet? why do you need torque setting for cam caps What you are probably hearing is your lifters ...
...turbo. I changed the water pump and put on a new head gasket . Now it will not start the crank is slow? What is the problem ? I have aligned all the timing marks according specification. I am at a ...
462 questions posted
Usually answered in minutes!
696 Questions
644 Questions
360 Questions
344 Questions
306 Questions