1995 Mitsubishi 3000GT "engine removal" Questions

spun bearing My engine was losing oil pressure. I was very stupid and continued driving. This resulted in my engine overheating, and a "knocking" sound as well...What should I do? You are up for an ...

...it may be under the AC compressor. you will have to take off the front right tire and loosen all engine mounts. using an engine hoist, drop engine to allow room for maneuvering. disengage negative ...

engine will randomly shut off while driving at various speeds, sometimes while idling. also security system often does not work, and sometimes activates itself and sounds alarm. 1993 Mitsubishi 3000 ...

...and Battery you must remove Battery Tray and Washer tank . hope this helps Makedo, you say the engine turns over, but does it start? There is no dedicated fuse, the fuel pump is powered by the ...

6g74 engine montero 2001 How to remove fuel pump of 1998 mitsubishi pajero 6G74 engine 3.5l the fuel pump is electrical high pressure pump and is located either next to the fuel tank or inside the ...

...go about changing the crankshaft bearings in my 92 mitsubishi 3000gt sl without pulling out the engine for i have neither the engine stand, cherry picker nor the money to get them. So i figured I ...

...V6 Magna Manual transmission from the motor, im currently working on it and need help/advice asap, engine and trans already out of the vehicle. undo all the bolts connecting transmission to tail ...

need advice on how to pull alternator out of engine compartment not enogh room how to remove alternator on 3000 gt sohc You can get the alternator out but you need to remove all the brackets also. And

...plenum. I have the new part and the parts store says it has one. It is nowhere to be found on the engine. Its a 3.0 non turbo. MIL light gave me code for it but I cant find it anywhere on engine? ...

do i have to pull the engine to get the crankshaft out May be easier that way...you may be able to get it out by supporting engine/transaxle assembly and removing the subframe to access oil pan then ...