1994 Mitsubishi Diamante "brake" Questions

brake lights not working not the bulb ive changed all the bulbs tail lights work but brake lights dont Check fuses, may have lost you brake light switch as well. Located behind brake pedal.

brakes will not work and brake caliper will not work on driver side and the abs hydraulic unit were is it located obviously the brake caliper is siezed both will needto be serviced by a professional ...

no brake lights on TR magna fuse o/k brake light switch seems o/k also check relay under hood. You can also verify the brake switch is working at the relay socket following these directions: ...

my car shakes when i hit the brakes You need to first isolate the breaking problem between the front and the rear . Here's how to do it: While driving about 30mph on a straight road , put the ...

...working fine. There are a few sensors and components which feed into a computer.Even though your brakes seem fine,there is something wrong.ABS takes sensor inputs from the wheel speed,sends them

How do you adjust the hand brake on a 2001 Mitsubishi diamante 1. Adjust the rear drum shoes for minimal clearance. Note that the linings may need replacing. 2. If necessary (and may not be) replace ...

add brake fluid If you have to add brake fluid or any vehicle fluids, you have a leak to repair,non are consumed That seems to get by everyone,never need to top off For the last 70 years, most ...

2003 mitsubishi left and right brake light doesn't work left and right brake light does not work. the fuse is still good. They have the brake switch in common, close to the brake pedal I would guess..

brake fluid is the brand of brake fluid that goes in the brake master cylinder the same brand that goes in the ABS braking system yes it's the same

Both left and right rear brake lights not working including led stop light indicator. Fuses in engine compt all okay. look on th eback of the brake pedal and you will find the brake switch wiggle it ...