1993 Mitsubishi Montero "valve" Questions

how to replace vave seals 93 mitsibishe montaro Your valve seals cant be replaced by removing your valve cover. The valve rockers assembly needs to be removed to access the valve stems and springs. ...

...engine management light is on and drives only 60 miles p/hour? what is the problem? u damaged the valve train or damaged a piston--blue smoke means ur burning oil pull the plugs to determine which ...

is my engine a non interferance engine if cam belt breaks it is a shogun 3.0 v6 petrol 1992 which i believe is a 12 valve engine 3.0 12 valve is non interference. 3.0 24 valve is interference engine.

...coming on, scan reads P0443 code. Please provide location and part number for Purge Solenoid ontrol Valve. Error Code: P 0443 Description: Evaporative Emission (EVAP) Canister Purge Valve - Circuit ...

My mechanic said my valve covers were leaking oil into my alternator and it fried it. Is thsi posible??? not unless it was very loose it would have to spray out of the valve cover and that doesn't ...

...the other pistons are as long as #1 is all the way up or Top Dead Center. What matters is what the valves are doing when #1 is at TDC. Watch the valves carefully as you turn the engine over and make ...

...transmixion Replace fuel filters and check fuel pump pressure. Mitsubishi P0089: Suction Control Valve Stuck https://www.troublecodes.net/pcodes/p0089/

110000 milege burning smell from engine oil ok transmission oil ok coolant ok look hard around your valve cover or your spark plugs holes especially #3 and #5. i found mine on 3 and 5 spark plugs. oil

...clicking or tapping noise that gets louder when you rev the engine is probably "tappet" or upper valvetrain noise caused by one of several things: low oil pressure, excessive valve lash, or worn

I recenly repair a valve problem and engine runs smooth and all of a suden it jams...stop rotating. Hi!! Make sure the valve locks (keepers) did not come off and the spring retainer is in place. If ...