1993 Mitsubishi Eclipse "remove valve cover gasket" Questions

...remove slack from throttle body cable, check resistance on TPS. If you have oil in your combustion chamber, replaced the valve cover gasket set (complete with spark plug valley o-rings Fel-Pro part ...

...valve cover gasket and rings and plugs, tried to start but got no spark, checked coil pack distributor, they r fine. while trying to start there was a pop sound from harness below throttle, help.... ...

...valve cover.If that goes it will cause the car to die,like no spark no fuel. 2.4l have the issue where the balance shaft belt will snap and will take out wither the timing belt or the crank position ...

valve cover gasget oil pan gasket someone told me the rear main seal????? how can i b sure If it in fact it is the main seal you should see tranny fluid leak at the point where the engine bolts to the

Remove the valve cover, which is a simple bolt on component. Remove the old gasket and install the new one. Here's a generic valve cover gasket replacement procedure - my sourses failed to provide

...remove replace VALVE cover:---- Click the link below:--- VALVE COVER GASKET REMOVAL GUIDE http://technoanswers.blogspot.in/2012/06/valve-cover-gasket-removal-guide.html ----------- For more help on ...

...remove the valve covers. (Ex.: air intake, loose wires etc.) Then you will need to remove your valve covers (using basic tools) and be very careful to not let anything get on your lifters, which your ...

...remove the valve cover and gasket. To install: CAUTION Do not use abrasive grinding discs to remove gasket material; only use manual scrapers. Do not scratch or gouge aluminum sealing surfaces or oil ...

...valve cover gaskets? Remove wiper arms/ Remove wiper assembly/ Alternator/ Power Block/Remove intake manifold/ get new gaskets for that/ valve covers are now easily accesible . Great time to change ...

valve cover. Remove bolts - Using a socket wrench, remove bolts holding valve cover in place. Take off valve cover - After removing bolts, gently lift the valve cover off engine. Clean surface - Clean