1992 Mitsubishi Montero "pajero engine wont turn" Questions

...pajero v6 3.5 usually when i turn the aircon on then i shift the gear to drive the rpm just drop and turn off the engine, but withou turning on the aircon the engine wont stop what seems to be the ...

...pajero could hardly shift to the 4th gear and thus could not reach to turbo level. If its having difficulty moving through the gears it could be a transmission issue or the turbo could be bad which ...

...PAJERO 2.8 DEISEL EXCEED AUTO 1996 HAS JUST STOPPED TURNING OVER. THE BATTERIES ARE GOOD ONES AND EVEYTHING LIGHTS UP. FIRST IT SEEMED THE BATTERIES WERE DEAD AND SO I BORROWED SOME JUMP LEADS AND AT ...

pajero-turns-over-but-not.html ----------For check engine light coming on,click the links below :---http://schematicsdiagram.blogspot.com/2011/12/car-jerks-while-going-uphill-and-check.html  

...Pajero had a problem with the starter motor which i've replaced with a new one. The engine is turning perfect now but the engine wont fire! Would anyone be able to help me and suggest a solution? Hi ...

Pajero starts perfectly at any time but once it heats up it wont start at all till it cools down. Once started it wont go over 3,500 rpm so its really slugish to drive, like somethings holding it back

...pajero dohc as only 3 leads your engine should be 6G76 V6 number one cylinder is closest to the timing belt With the plug out and finger over the plug hole while turning the motor clockwise ...number ...

...pajero up town the other day just left my drive way started making a tapping noose under the hood so i did a u turn but the hole car shut down now it wont start keeps makin a noose every time i turn ...

pajero wont start Hi have replaced coil,rotor,rotor cap.leads and plugs the thing was going fine then it started to die in second a couple off weeks ago.Then tried starting it and had to keep starter ...

...Pajero had a problem with the starter motor which i've replaced with a new one. The engine is turning perfect now but the engine wont fire! Would anyone be able to help me and suggest a solution? ...