1992 Mitsubishi Montero "crank remove sensor" Questions

Ad

Question about Mitsubishi Montero

2 Answers

...crank shaft pulley is a sensor type or non sensor typ. 1996 V26 Engine 4M40 2.8 turbo diesel Easy answer. When you look down from the top of the engine, there will be a small wiring loom that runs ...

Ad

Question about Mitsubishi Montero

1 Answer

...crank the engine, then your timing belt may have broken. Mitsubishi uses a rubber timing belt on this engine with a 60k replacement interval usually. Remember, no rotation of the distributor shaft ...

Ad

...are firing differently then the 2 other cylinders, then either the coil packs or module, and lastly cranks sensor would be at fault. You can view a full free online repair manual, if you register for ...

Question about Mitsubishi Montero

1 Answer

...crank pulley. To access it I'd strongly recommend pulling the entire engine as the oil pan will need to be removed and the fron of the engine will have to go too. Your engine is found in many cars ...

...To replace crank angle sensor . 1.you will need to remove drive belt 2.remove harmonic balancer to get to crank angle sensor 3.remove crank angle sensor then do these steps in reverse to ...

REMOVE PULLEY TO REPLACE A CRANK SENSOR replacing A 2006 CRANK SENSOR. HAVE REMOVED COVER MUST I REMOVE PULLEY TO REPLACE SENSOR No. Disconnect neg battery terminal/remove connector from sensor/remove

Question about Mitsubishi Montero

1 Answer

...crank sensor is located behind the crank pulley on the 3.8 liter. The crank pulley must first be removed. A 15/16" socket, three very long 8 x 1.0 bolts (pretty sure that is the size, some large ...

...remove the crank sensor. Knock sensor: There may be 2, a front and a rear. Both would be UNDER the intake manifold on top of the engine block one behind the other about 8 inches or so apart. The ...

...Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. ...

Question about Mitsubishi Montero

1 Answer

...3 discovery 3 trying to locate crank sensor on discovery 3 tdv6 se You will find the crank sensor near the turbo, you will need to remove the body and the gear box to locate the crank

Not finding what you are looking for?
1992 Mitsubishi Montero Logo

85 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...