...pen or similar to clean off the oxide. Re fit the bulb in the holder. Clean the exposed copper part of the flex-print where the contacts of the holder twist over, and refit the holder and bulb into ...
...holder prior to removal, with a marker pen. 1, 2, 3, upper, middle, lower, etc. Remove each bulb holder, by turning counter clockwise 1/2 turn, and withdraw holder. Inspect each contact. You can bend ...
...or not and also get a curcit tester pen and test the central locking fuse holder circit hope this helps cheers I need to know where #15 blue fuse gose in my 1986 Jimmy. Mine doesn't have a fuse
...under the coin holder located behind the shifter. use a small screwdriver to pop it out and then insert a pen or pencil to depress release tab. detailed instructions may be in your owners
...holder. Then turn the headlights on. Using a ballpoint pen so as not to injure your fingers, insert it into one of the holes in the knob atop the motor and turn it clockwise. This should start to ...
...holder out (the one closest to the dashboard) you will see a piece of the inside which you can slide up and remove. you are going to use that piece like a tool! (go to the passenger side and you will ...
...holder down in tail light.......need to take off cover on outside to get it back......no wires attached(has contacts).....cant figure out how to get lens off without cracking it. Try a "pen magnet" ...
...pen holder directly underneath the radio, that can be easily removed by gently prying on it to release it. Now there should be about a set of 2 (4 total) Torx 25 screws. Remove the two that hold the ...
...holder, and reach in underneath and pull on the LED unit. You can pull it out by hand at this point. Unplug it. take a torx bit and remove the black plastic cover around the unit. locate the white ...
167 questions posted
Usually answered in minutes!
112 Questions
121 Questions
100 Questions
96 Questions
67 Questions
