1991 Mitsubishi Mighty Max "v6 connecting rod torque specs" Questions

...V6, per my manual: All in FT pounds torque,unless noted: Main bearings: 60 Connecting rod bearing cap nuts: 34 Rocker arm shaft bolts 180 INCH POUNDS Intake manifold: 168 INCH POUNDS Exhaust manifold ...

bearing and connecting rods on a 2000 Nissan Xterra 3.3 v6 Main Bearing Torque 67-74 ft lbs Rod Bearings Torque 28 - 33 ft lbs You might want to use plastigage to check rod bearing clearance at torque

...connecting rod caps? According to Torkspec.com, for GM 4.3l 262 ci V6 the specs are as follows; Type: Dim: Length: Head: Nut Grade: 20 Ft-Lbs 240 In-Lbs 27.12 N-m Connects: Connecting Rod To Engine ...

...V6? Connecting Rod bearing cap bolts torque to 27N~m (20 lb. ft) + 50 degrees with torque angle gauge. You my also find this web site useful. www.mifbody.com There is a bulletin for this ...

...the torque specs on the conrod bearing caps for the 1990 toyota 4runner V6, 3VZ-FE engine? thanks connecting rod cap torque specs is 18 ft. lb and tighten an additional 90 degree. hope this can ...

...V6 engine, the connecting rod bearing cap bolt torque specifications are as follows: Tighten bolts to 18 ft-lbs (24 Nm), then rotate bolts 90 degrees (1/4 turn) and then rotate bolts an additional 90 ...

...V6 engine: Cylinder head bolts torque: 30 Nm (22 ft-lbs) + 90 degrees + 90 degrees (in 3 steps of 90 degrees each) Main bearing cap bolts torque: 30 Nm (22 ft-lbs) + 90 degrees Connecting rod bolts ...

V6 Torque Specifications air intake plenum 11-14 ft lbs. camshaft bearing cap 14-15 ft lbs. connecting rod nut 37-38 ft lbs. camshaft sprocket bolt 66-67 ft lbs. crankshaft pulley bolt 108-116 ft lbs.

...V6 main bearing caps(bootom end) has 16 bolts need torgue specs please! Okay, the main bearing caps only have 10 bolts, i think your looking for the connecting rod caps, they have 16 bolts, i will ...

4.3 v6 connecting rods and main bearings torque specs On 4.3 what does second pass 75° mean?