1991 Mitsubishi 3000GT "ready start engine stalls" Questions

...ready to snap off , try the wiring first and if its not that then the oil pump is on its way out. john sounds like you may have 2 problems the main one to worry about is your appaent loss of oil ...

start it right back up by putting it in newtroll and sometime if it ready to stall and you pump the gas it will keep running help it sounds to me that you idle controll valve isnt responding (could be

...start in gear. only in park or nuetral. the obd said a code 12 which is not detecting any faults. when its ready to stall, it feels as though the transmission is slipping but that wouldnt cause the ...

...ready for when you jump start the engine and read across battery terminals if reads below 13 volts the alternator needs replacing ,check that the drive belt is tensioned correctly as this would make ...

ready to stall but won't stall. Also while driving engine will miss and seems transmission is slipping. My problems in these areas getting worse. Car has 44,000 miles. For what I paid for this car

engine idiels go high and low as ready to stall at cold starts? Change your IAT valve (idle air control)

...can get a flat spot anywhere in its circuit explaining why your car hesitates or sounds like it is ready to stall out ' I would replace it and have the voltage set at 1.5 volts when set at the idle ...

...ready to buy a new car in febuary but i need this one to last a little longer the car runs ok but sometime it bogs down and acts like it wants to stall sometimes it stalls and other times i have to ...

start system light came on while driving.....was preceded by a popping noise.....the radio cut off as well....what is wrong....what is the fix? did the engine stall, stall is 0 RPM. at all stalls, The

...engine light stays on.Dosent start cold, stalls out, 2nd time starts rightup, but shakes in idle. Is your check engine light on ? Fuel comp. is fuel system monitor test complete , along with HO2 , ...