1990 Mitsubishi Montero "injector pulse problems" Questions

...a spark. Check for spark or fuel injector pulse. To check fuel injector pulse rent NOID lights from auto parts store. If no pulse I expect the Distributor if no fuel I expect the ECU Best regards, ...

...injector signal from ecu and fuel pump not working, all fuses are OK, truck shut off while driving. difficult one could be a multitude of problems from a supply problem to the ECU or the factory ...

...injector pulse Injector pulse comes from Cam sensor, If you have a BAd CAMSHAFT sensor you will not get injector pulse, replace sensor and that should solve your problem. Good Luck and thanks for ...

Mazda BT 50. Problem with pulse to injectors Do not get pulse to injectors on my Mazda BT 50 Help here https://www.google.com/search?q=Mazda+BT+50.+Problem+with+pulse+to+injectors ..

...injector pulse i tried a module but still same problem. fuel is getting to rail but no message at injectors. looking at the schematics, well the PCM controls the pulse width to the injectors , BUT , ...

...Injector Pulse My 1999 Camry bucks and stutters and dies after being warmed up and driven for about 45 minutes straight. it's at my mechanics now and he is having a heck of a time diagnosing the ...

1986 pontiac fiero won't start, changed fuel pump and relay gas coming up, but no spray from injectors Actually the injectors don't spray "all the time". They pulse open for a few milliseconds then ...

...injector pulse going to the injector?(an electrical pulse to fire the injector). Is there spark at the plugs? If the pickup in the dist is faulty you won't have either one. If your vehicle uses a ...

Why is the left side injector not receiving pulses The left side injector is not receiving pulses. I swapped injector wiring between the two and the left side injector functions. The left injector ...

injector pulse 4 cyl 93 f250 460 If you have a $5 test light, you could find the problem. Just know that all eight injectors have a constant voltage applied to them anytime the key is in run or start.