1990 Mitsubishi Mighty Max "gear" Questions

...has a hydrolic clutch, pedal goes to the floor befor i can shift, even then it is hard to get in gear, all gears. how do i fix this? Mighty max clutch fix. i cant get in to gears except i press ...

where do I find a starter gear for a 4 cylinder, 5 speed manual transmission. the starter is fine, but the ring gear is really chewed up to the point the starter will not engage properly. You need a ...

Hard to get out of third gear and have lost fourth recon gearbox fitted 12mths ago to my 1993 mitsi l300 van,this has a 4d56 non turbo with 5spd box,after making reasonably heavy trailer load of steel

where can i locate to put tansimittion fluid in my 87 might max manuel clutch cant put my truck in gear unless I turn it on and ride it on second gear. clutch goes down to the floor need to put tranny

...the clutch stays against the fly wheel when running in neutral and will not allow it to go in any gear. the cable is moving the throw-out bearing fork and to me the fork seems to be to easy to move ...

My tranny has decided to become locked into some sort of gear but the stick itself won't go into gear..when I push the pedal in it puts the clutch into nuetral but the tranny is definetly locked ...

MY ENGINE KEEPS BACK FIREING ONCE I LET GO OFF THE THROTTLE, ITS A 4G63 CARB ENGINE, EVEN IN 5TH GEAR one of the plug wires is wrong

...bearing and pressure plate --now the problem is i can not get the clutch to engage enough to shift gears-- i have taken everthing back off to recheck all parts and to match the ones i just replaced, ...

95 Mighty Max, standard, starts but won't move when in gears. It's a standard trans, I put it in gear and it won't move, bogged down and stalled, wouldn't start, got it home, it starts, but will not ...

why isnt my rotor button turning Possibly a sheared roll pin on the distributor or the gear is striped. Take the Distributor cap off with wires attached if there is room to move it out of the way. ...