1990 Mitsubishi Mighty Max "distributor cap rotor" Questions

Ad

Question about Mitsubishi Mighty Max

1 Answer

...distributor cap and note where the rotor arm is pointed. That would be the Plug wire number 1 position. Distributor rotation is clockwise so starting from this position connect the plug wires ...

Ad

Question about Mitsubishi Mighty Max

2 Answers

...distributor cap. Make a mark on the distributor with a marker or crayon or even chalk exactly where number 1 plug wire lines up on the distributor. Remove the distributor cap from the distributor. DO ...

Ad

Question about Mitsubishi Mighty Max

1 Answer

...Distributor cap off with wires attached if there is room to move it out of the way. There should be a bolt at the bottom with a bracket, remove the bolt and bracket and remove the distributor, check ...

Question about Mitsubishi Mighty Max

1 Answer

...Cap -- Distributor Cap Cracked or Burned. 3 Inspect Fuel Filter -- Clogged or Dirty Fuel Filter. 5 Inspect Ignition Coil -- Faulty Ignition Coil. 6 Inspect Wireset -- Worn, Damaged or Faulty Spark ...

distributor cap and rotor(like a dummy)when i did the plugs and wires. Where the new wires and plugs too much juice and fry the distributor rotor? I'm definetly no mechanic, I need your expert advice!

...cap.. I would pull the distributor and place the engine timing mark exactly where I wanted it on compression stroke. turn the distributor shaft until the rotor button was pointing to no 1 cylinder ...

Question about Mitsubishi Mighty Max

1 Answer

...distributor cap. is the rotor turning, yes, no no then the timing belt is broken. Okay now let say you crank it and the distributor does turn. put the cap back on. lets check for pwer at the coil if ...

...cap! Distributor Cap & RotorThe distributor cap is held on by two screws or clips. Release them with a screwdriver and lift the cap straight up and off, with the wires attached. Inspect the cap ...

Question about Mitsubishi Mighty Max

1 Answer

...distributor with cap, rotor and new lead set. Timed it to North on T-belt with rotor in spark position ONE. Besides, still no spark, and spent almost $300 and 3 days. Can anyone suggest something I ...

Question about Mitsubishi Mighty Max

1 Answer

...distributor cap to the spark plugs in the correct order. where the needle in the dist. cap points after alignment should be number one. going clockwise, does it go in order from 1 to 4 and also for ...

Not finding what you are looking for?
1990 Mitsubishi Mighty Max Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...