1988 Mitsubishi Montero "pulley" Questions

Ad

Question about Mitsubishi Montero

1 Answer

... tensioner that adjust the belt, locvation check for a bolt behind the mounting bracket of an idler pulley. If you have one then loosen of the nut in front of the pulley and the bolt will adjust the ...

Ad

Question about Mitsubishi Montero

1 Answer

2001 montero sport replace air condition belt how do i loosen the pulley to get the new belt on? there should be a nut on the front of the pulley loosen it off a few turns then there should be a bolt ...

Ad

...1983 3.0l V6 - Twice now the key hoilding About 1983 3.0l V6 - Twice now the keyway holding the pulley on crankshaft has broken, causing the pulley to spin on the crankshaft tip damaging the ...

Question about Mitsubishi Montero

1 Answer

idler pulley came off, have pulley and new bearings, need bolt and washers(?) to install, but i am getting mixed answers about the assembly. do you have a schematic or a trusted source for this puzzle

Question about Mitsubishi Montero

1 Answer

need serpentine belt layout for 2003 mitsubishi montero Hi there, To Remove: Rotate the tensioner with a ½ in square drive breaker bar until hole A aligns with hole B. Insert an allen wrench or ...

Question about Mitsubishi Montero

1 Answer

Crankshaft Woodruff Key Removal The crankshaft pulley has sheared the woodruff key. I have had a new keyway cut in the pulley. The old key is not yet removed. It appears to be used half for the ...

Question about Mitsubishi Montero

1 Answer

...to keep the belt taught as it goes around the srocket, next the belt goes under the water pump pulley and over the left pulley (left when facing the engine from the front bumper) again the belt ...

Question about Mitsubishi Montero

2 Answers

missing pulley We had an tentioner pulley fall off, as well as the fan belt... We have the correct replacemnet parts but, cant figure out which way the serpentine belt goes back on. We really need a ...

Question about Mitsubishi Montero

1 Answer

how do you know you have a bad pulley the new belt pop and made noise when i put it on The pulley will have a constant screech or whine. The tension on your belt could be loose or it could be freezing

Question about Mitsubishi Montero

1 Answer

when starting belts kick off first of all make sure the all the pulley turn if one is locked it will burn the belt or throw it off. check the alignment of the pulleys that will always throw it off

Not finding what you are looking for?
Cars & Trucks Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...