loose or not enough ground. You will need to check that there are ground straps in some sort of loop, form the battery to the engine, to the frame of the vehicle, and back to battery. The second would
...the wires they may not be making contac or a loose ground do the same with the bolt and use some electronic grease to avoid rust. finaly check the relay in the fuse box it migth getting hot,good ...
loose connections or even a bad solinoid in the starter. When trying to start what do the headlights do? if they dim your solinoid is probably ok and back to a power issue unless the starter itself is
...it will not rev past 3500 rpms and stalls you probably have some loose wiring on your starter,if you do and need to tighten them,disconnect your ground battery post first or youl have sparking going ...
Question about Chevrolet Uplander
...heads and if it breaks or comes loose it can cause the same concern.. Usually the ground is the issue if a engine has recently been removed or installed. Or one or both of the heads have been
Question about Chevrolet Uplander
...loose ground/positve wire or the socket is bad. you can easily purchase a after market socket from Napa or Oreillys for a few dollars of the problem is not a loose wire or bad fuse. good luck please ...
...ground and try to get movement from in and out wiggle it put one hand on top of tire one on bottom of tire and **** it in and out to see if that bearing is loose .. if so it might need replaced or ...
...the heavy starter current) or shorted to ground. 2. Main ground wire from battery to engine is loose or aged. 3. Improper connection between the battery and chassis ground. 4. Starter motor
Question about Cars & Trucks
...fuel check for bad battery grounds , loose grounds ground wires around engine mounts from your description it is something loose in the circuit that is moving with the bumps that is breaking ...
...installed reman alternator a month ago. the wire to the battery and the alternator got hot real fast. its a ground problem.check for loose/broken ground cable bolted to the bell housing by
759 questions posted
Usually answered in minutes!
500 Questions
280 Questions
25 Questions
18 Questions
8 Questions