STEERING PUMP. AFTER YOU REMOVE THE ACTUATOR CHECK TO SEE IF ANY OF THE SCREENS ARE DAMAGED OR MISSING. IF SO REPLACE THE ACTUATOR. ALSO CHECK THE CRANKSHAFT END PLAY. IT SHOULD BE BETWEEN 0.0044" - 0
Question about Chevrolet TrailBlazer
...change the pitman arm. What is the way to remove the old one. I don't have the room to use a pitman arm puller on it. Do I have to remove the steering gear box ?? Take the bolts out that attach the ...
...steering pipes and hoses for any leaks. just replace them if a leak is found. if your reservoir itself has a leak, then your only best bet is to replace the whole ting .. You can change the seal.But ...
...Shaft nut - 177 ft-lb • Hub and bearing assembly to steering knuckle bolts - 133 ft-lb 2003 chevy silverado 1500 4.3 v6. Changing steering rack and https://www.justanswer.com > ... > Chevrolet Repair ...
...change the seal in the steering gear box ? Steering Rack --you replace,they are not serviced for seal leaks Steering Box--- I doubt you have --comes out & be worked on The pitman nut & arm ...
...change the spark plugs on my 1999 chevy s10 but need to know what to remove to get to them. Most of plugs are unreachable. remove the steering shaft to reach the left ones and go through the wheel ...
Question about Chevrolet TrailBlazer
...steering seems to change as i turn. What i mean is that it tends to be stiffer at certain points trough out a turn. I have checked my power steering fluid which is fine. And i have also checked all ...
...change the sparkpulgs in my 1998 chevy blazer? it is 4WD. 4 door. The plugs can be accessed by removing the front wheels and lifting up the flexible rubber splash shields on inner fender. All plugs ...
Question about Chevrolet TrailBlazer
...you put in to much money and work. Its your steering shaft, only about $400.00 parts and labor and plus a front wheel allignment and your good to go. Maybe the wind is catching a loose side
Question about Chevrolet TrailBlazer
...steering shaft sizes changed in the 80s or late 70s, so you may have to buy a conversions "rag" joint or modify an existing one with the shaft end of the Rambler column and the box end of the ...
1,636 questions posted
Usually answered in minutes!
3,219 Questions
2,541 Questions
1,576 Questions
976 Questions
217 Questions