2006 Chevrolet HHR "windshield wiper blades hitting" Questions

windshield wiper blades Normally, you press the little lever on the picture below and the wiper blade slide off the arm hook. Sometimes you have to hit the blade downwards a couple of times to make it

wiper blade on windshield to ensure proper position upon reassembly. Remove washer hose. Lift wiper arm from windshield and use a screwdriver to disengage retaining latch. Remove wiper arm from shaft.

...stops hitting the other wiper blade. What could it be? the fuse? the motor? im not sure bent/broken wiper arms under the base of the windshield..remove the vent cover and service/replace broken

...windshield wiper off Montero 2002. There's a clip I have both pushed and pulled but can't get it loos there is a clip under the blade where the arm that goes through the wiper blade is a tab that you ...

...windshield. The problem was a broken Wiper Rod A. My local mechanic replaced it - the part was about $20 and the labor about $230. Have them look at wiper rod A adjusted the wipper transmation ...

windshield wiper losens and hits outside mirror the bolt losens and after about 2 swipes the wiper blade hits the outside mirror - what part needs replacing? The cone needs to be replaced on the wiper

...wiper arms instead of the windshield. This means the windshield is dry during the first pass of the wiper blade and only spreads the liquid on the return (downward) pass. This is not very effective ...

windshield wiper arms My windshield wipers keep hitting each other. I took it to a mechanic he said the arms were bent. He bent them back. They are still hitting each other. The wiper blades might be ...

...windshield molding. how do I adjust the wiper travel? There is a tool for that, to take the spring tension off the armYou can still wrestle it off, by lifting the arm off windshield& on the arms ...

The windshield wipers sound like they are hitting the wall on both ends of the strokes. WIPER BLADES TOO LONG.COULD HAVE WRONG SIZE BLADES