2006 Chevrolet HHR "remove upper control arms" Questions

Ad

...arm anchor bolts. Remove the upper arm from the vehicle.Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be

Ad

...Remove the upper arm from the vehicle. Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced. To install: Use ...

Ad

Remove the upper ball joint retaining nut and pinch bolt. Separate the ball joint from the front wheel spindle Remove the front suspension upper control arm. To Install: Installation is the reverse of

...support lower control arm assemblies.then you remove self locking nuts upper control arm bolts and upper control anchor bolts. then separate the upper ball joint. dont have to remove coil

...Remove the upper control arm by removing the nuts on the engine side of the arm holding it to the frame. Use a wrench for this, but as the bolts are loosened, keep the alignment shims together that ...

...remove the upper ball joint nut and pop it loose, then just remove the two pivot bolts. If you do remove the shocks be sure to have the lower control arm supported or the torsion bar will swing the ...

Question about Cars & Trucks

1 Answer

remove the upper control arms, again one side at a time. You will use a15mm socket to remove both the bolts holding in the upper arms. Once the first upper arm is out we again made the uppers the same

Question about Chevrolet HHR

1 Answer

...remove upper control arm. Ther is another way to do it but it can be frustrating, You could take tire off , remove the upper bolts in the engine bay and the upper balljoint from the car but the ...

...remove the upper control arm now you can go in with the new one.Hope this helps !!! The Ball joint on a 1996-2000 civic is not a servicable part from Honda; the entire upper control arm must be ...

...remove and discard upper control arm to frame bracket bolts, nuts and washer. 2. remove large washers welded to upper control arm frame brackets. remove wield beads from upper control arm brackets. ...

Not finding what you are looking for?
2006 Chevrolet HHR Logo

1,765 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...