2006 Chevrolet HHR "low engine power" Questions

...engine on the jump, the other cars battery was a much higher cold cranking ampere rating than yours and you sent a fatal short to the pump itself, even if the fuse blew it might not have prevented ...

...engine power low? any ideas what this is???????? is the batt at normal charge--also inspec for any wire disconnects in the process--neutral safety switch may have issues--do you have a haynes repair ...

...engine power low message There are 4 bolts in the fuse panel under the hood they bolt the plugs for the wire leading to the fuse panel to the upper fuse blocks. Two of the bolts were loose causing a ...

engine has not reach operating temperature in a calculated time frame. Most likely cause is bad thermostat or low on coolant. P2176 is the throttle position sensor has lost its learned value. Throttle

...engine size. Under system click on lighting ,then under subsystem click on headlamps . Click the search button then the blue link . Looking at the diagram you will see the headlamp / multifunction ...

ENGINE LIGHT IS ON AND IT SAYS===SERVICES===POWER STEERING====TRACTION CONTROL===AND IT WON'T SHIFT OUT OF LOW GEAR. What fuse blew ? What did you hook up to for battery power for the fog lamps ? What

engine down and checked the oil level three-five minutes later. there was no oil on the dipstick. drove back to Mineke. Josh (mgr) said the oild was a quart low and apoligized. They then took it for a

...engine bay close to the firewall. Typically you don't need to too it off as it's not a consumable fluid. If it's getting low and your brake pads aren't worn then you should check the system for brake ...

...engine lost power and all my lights went out. Low traction came up on the odemeter. The other two times it was pot holes and I lost all power including brakes and steering. Chevy dosn't want to touch ...

ENGINE PWR LOW or something to that effect. After a minute or so I tried again and got a message ENGINE DISABLED. After waiting a few more minutes, it started but now the engine light is on. Any ideas