answer... Its hard to put a price on something you can't see, the best thing to do is find a auto shop you know you can trust and get an estimate Word of mouth travels ferther and faster than anything
answer..but.. It is located in the reservoir. removal from under the vehicle. REMOVAL Disconnect and isolate the battery negative remote cable. Disconnect washer fluid hose at in-line connector on top
little can decrease the performance of the system and possibly damage the compressor. Good luck and hope this helps. Keep me posted, be glad to answer any question you may have. Oh and add 911 to
...answer in Google,but nothing so far,so I was told and decided chng filter...same,clicking on flat engn run...like click.. click...click...an so on...I got mad and took off injector block: Then I ...
answer if you felt it was helpful Generator ?2.0L Zetec-E Removal Disconnect the battery ground cable. Remove the accessory drive belt. For additional information, refer to Section 303-05 . Remove the
...answer (if you are interested)....... The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked ...
...little weak. If it can jump that 0.075" gap you should have no problem igniting an engine.You can also use that to check coils on some vehicles.Cylinder Balance TestFirst of all you will need a ...
Question about Ford Cars & Trucks
little rough //////// these are all to be checked do the easiest and cheapest first then start spending $-$$ these are normal tune up issues here and I'm not there obviously so only you can answer any
...ANSWER WAS TO ADD OIL AFTER THE FACT. OF LITTLE HELP. DO A COMPRESSION CHECK BEFORE BEGINNING REPAIRS. MAY GIVE SOME INSIGHT ABOUT RINGS THE HEAD WILL NEED TO GO TO A MACHINE SHOP FOR MILLING AND ...
1,765 questions posted
Usually answered in minutes!
207 Questions
165 Questions
69 Questions
51 Questions
30 Questions