2006 Chevrolet HHR "front end car rocks side" Questions

...front end 2006 hhr was told it was the struts replaced them and that did not solve the problem with the car parked try rocking the car back and forth from side to side do you hear the noise?If you do ...

front end when rocking side to side clu nking in front end when rocking side to side and when driving. Go to an alignment shop. Sounds like tierod ends or ball joints. They will yank on them before an

front passenger side of car place hands at 3 0clock position and rock wheel if it feels like that there is excess movment it probably track rod end next check for ball joint by positioning hands at 12

...front end area of my land cruiser when driving at any speed. Also if you rock the vehicle side to side it will squeak. Does the land cruiser have lubrication points that I overlooked ? Thanks, Austin ...

front end there is a rattling noise (like a loose rock) and the faster I go the faster the sound is The noise sounds like a rock on the front passenger side, I took off the hub cap,no change, also the

...front end it will be a tie rod end or drag link get under car and compare one side of suspension to the other look for somethink bent or shape differentlythere should be scrap marks on the suspension ...

front end vibration. I replaced the pitman arm and idler arm. Was told that an inner tie rod end needs to be replaced. If the tires are balanced, what would cause highway speed shimmy/vibration? Also,

front end. What could this be? A worn or broken motor mount will cause a vibration in the front end at low speeds. With the vehicle turned off and motor cool you can grab the motor and attempt to rock

...front end, pulls to right This Is Most Likely the Wheel Bearing on that Side Failing, FWD Vehicles are Whole Units and Fairly Easy to Replace. I would say wheel bearing track rock end or warped brake ...

...front end shake at 40 mph than quits at 55mph? Im just askn...Does your steering wheel also shake? I,d start small look for any thrown wheel weights, wheel bearings, I would like the front end up so ...