...ABS sensor lead wire which should be along the A-arms to the ABS sensor on the inside wheel hub. Spray brake parts cleaner to the sensor and speed ring to ensure there clean and free of dirt that may ...
abs to determine what the cause of the problem is. until then that light will stay on. may be your brake might be working. but sensors are not! try oscilloscope scan with the sensors and find out that
Question about Chevrolet Colorado
...ABS sensor. Best thing to do is check all the wire harness from all the wheels for cracking or breaks. The sensor could also need some adjustment, not sure how it is on the Colorado. There are some ...
...and the abs fault comes on. Any help with what may be wrong. have changed brakes and hubs. one of your abs sensors is faulty also check that there is no rust on the tabs that the sensor reads
...bad or the abs sensor is bad will set off the codes have the car/truck checked for code usually can verify which side is going bad [didnt specify what vehicle u have] so u can replace or repair ...
...ABS is a sensor located in the hub. It is possible something happened to it changing the hub. You can pull the sensor and take a multi-mater and set it to Ohms. Now on the connector the is a neg and ...
...dont get the ABS sensor in right spot and right distance from hub, you will get abs fault. its one or both of those, mostly i see broken wire,did you disconnect wire to abs before you removed the
...light came i changed my front brakes and rotors..ABS light came on and wont turn off..???? did you knock off a wire on the sensor ,or even break the sensor unit when you changed the
amp;gt; then with in2 miles abs fault light comes on. I have replaced abs sensor on wheel , i have now noticed pulsation or abs unit on dry roads ay ideas?? thanks ABS modulator unit may be going bad
946 questions posted
Usually answered in minutes!
827 Questions
379 Questions
87 Questions
5 Questions
17 Questions
