...Replace Ignition Cylinder) - (Aug 10, 2009) Subject: Ignition Key Difficult to Remove, Ignition Key Binds or Sticks in Cylinder (Replace Ignition Cylinder) Models: 2008-2009 Cadillac CTS (Built Prior ...
...to new key new ignition switch key lock system. dealership fix need diagnostic eqquipment to reprogram new ignition key and ignition switch lock cylinder to the immobilizer control module and
...Replace the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement in SI. Correction 4 Replace the slide indicator and guides in the shifter following the procedure below: Apply the ...
...in the on position and I can't get my car to turn off! This is most likely a defective ignition lock cylinder and will need to be replaced common problem call your dealer may be under ...
...begun sticking. Is this common? Hello: Yes it is common. You can try a new key and it may be ok for a while but the ignition lock cylinder will probably need replacing to correctly repair the
...replace the whole clockspring assembly. Might also be problem with ignition switch (inside column) that key lock cylinder ingages into. I have a couple of questions. Is power going to the dash and ...
...ignition on and off to move the graphite into the lock. Hopefully this will loosen the lock clyinder and release the key. If you do manage to get the key out inspect the key and see if it is worn or ...
...is stuck in the start and I cant turn it back in the off position You need a new ignition switch lock cylinder. GM is extremely bad for these things going bad. There not all that expensive to
...ignition, keeps draining my battery. My shifting lever moves with it in park. Am I able to get this fixed for free. Very bad safety issue, especially with little ones around. SOUND LIKE YOU HAVE A ...
2,158 questions posted
Usually answered in minutes!
818 Questions
485 Questions
212 Questions
74 Questions
42 Questions