2006 Chevrolet Cobalt "install oil pan gasket 2" Questions

Ad

...oil pan. To install: Make sure that the oil pan and mounting surface on the lower crankcase are free of all oil and debris. Fig. Apply a 2mm bead of GM P/N 123785251 ...

Ad

Install the oil filter. 3. Install the bolts. ^ Tighten the transmission oil filter bolts to 20 Nm (15 ft. lbs.). NOTICE: Refer to Fastener Notice in Service Precautions. 4. Install the front oil pan.

Ad

Question about Chevrolet Cobalt

1 Answer

...new pump and tube tork bolts to 45 fp replace oil pan gasket and install oil pan tork pan bolts to 35" pounds install drain plug fill with oil start and check for leaks let me know if i can help ...

Question about Chevrolet Cobalt

2 Answers

...Install the oil pan within 5 minutes after applying the liquid gasket to the oil pan. 2. Install the oil pan to the engine block. 3. Install the oil pan retaining bolts. Tighten Tighten the oil pan ...

...Install oil filter and adapter. Install trans-axle lower dust cover. Install power-train bending strut. Install front engine mount and bracket CAUTION: The torque procedure for the structural collar ...

Question about Chevrolet Cobalt

1 Answer

...on oil pan or oil pan gasket. Gasket is mounted to engine and does not come out with oil pan. reverse to install do not over tighten bolts follow normal torque sequence but here's a pic just in ...

Question about Chevrolet Cobalt

2 Answers

...oil. To install: Install a new oil pan gasket to the oil pan. Apply liquid gasket to the corners of the curved section of the gasket. Install the oil pan to the engine. Install the oil pan nuts and ...

INSTALL OIL PAN BOLTS INSTALL THEM CRISS CROSS TORQUE PAN BOLTS TO 7 TO 10 FT LBS. LOOK IN OWNERS MANUAL FOR TRANSMISSION FLUID CAPACITY.BUY 10 QUARTS .TO BE ON SAFE SIDE SO YOU WILL HAVE ENOUGH FLUID

...install the oil pump pipe and screen. Secure with the retaining bolt(s) and tighten to 89 inch lbs. (10 Nm). Place a new formed rubber gasket in the oil pan flange. Position the oil pan and secure ...

...oil pan. Install or connect the following: Oil pan. Tighten the bolts in sequence to 50 inch lbs. (6 Nm). Torque converter dust shield Bending braces Front motor mount bracket Starter motor Negative ...

Not finding what you are looking for?
2006 Chevrolet Cobalt Logo

2,158 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...