2005 Chevrolet Impala "blend door actuators" Questions

...side and cold thru passengers side have checked all blend door actuators all are good, starts cold then turns to hot air You have a problem with either the blend door actuator of the door

to lye on back to get to up by the gas pedal tight fit area had to replace them myself to. You hqave a problem with the blend door or the blend door actuator, this door controls air temp at the outlet

...blend door actuator I own a 2000 and have had problems getting any airflow from the heater or A/C. Both work as the cab will cool or warm from the air radiating from the vents. All settings on ...

Blend door How do you reset the blend door actuator? ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws

...blend door actuator not working properly. replaced actuator, when plugged in before installing actuator runs constantly. Is the problem in the control board or in the dash? Hello: I have bad news for ...

...Door Actuator Impala 2006 2013 need to check the vent actuator and blend doors in the ducting ...

...blend door and motor in the heater box. The blend door motor comes on when you select a setting. It actuates the blend door and directs the floe of air to the proper place. Sometimes the blend door ...

...blend door actuator in a 2008 chevy impala ls Intermittent clinking in area around radio Its probably a warped blend door in the heater box. Check with a dealer, might be a recall item. Otherwise you ...

blend door actuator or blend door, this door moves back and forth to get the desired temp, the actuator is electronic and prone to this type of problem, suggest u replace it. My car was doing the same

...blend door. Removed fan and clicking still there. Is it possible the blend door is causing the clicking. It only starts when temp controls are moved from col to warm. could be the blend door ...