top of the brake caliper housing and against the back of the outboard brake pad. 6.2.Slowly tighten the C-clamp until the piston pushes into the brake caliper enough to slide the brake caliper off the
Question about Chevrolet TrailBlazer
...top of each end of the caliper. Remove these two bolts then pop the caliper up and off with a big screw driver or pry bar exposing the brake pads. Do not remove the brake hose. Replace pads....push ...
...top of the pad for 1,and up about the same distance from the bottom of the caliper for the other.hope it's some help. Once you find and remove these bolts as is described above the caliper should be ...
...top side of each brake caliper. I assume the clips do something. I have replaced disc brakes on several other brand models over the years but the disk brakes did not have the clips. Thanks for any ...
...top, if it is on the bottom then wrong caliper, try the other one,After caliper is on you will then need to bleed the brake system,This all depends on what happened, if the brake fluid did not all ...
...caliper off. set off to side or on frame somewhere(do not let hang from hose). Next you need to take off mounting bracket which should also have 2 bolts securing it to the vehicle. Remove those 2 ...
...top of the caliper back until the top clears the rotor, then slide the entire thing, pads and all, up. You now have the caliper assembly off. The brake line is still attached so you'll have to set it ...
...caliper is on the top rear side of the assembly you're looking at.There are 2 long bolts you'll need to remove to take the caliper off the vehicle. Don't remove the brake line or open the bleeder ...
5,006 questions posted
Usually answered in minutes!
2,541 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions
