Question about Chevrolet TrailBlazer
know this vehicle I don't have enough information to give you the magic answer yet. check fuses and relays --run a scan on the truck if their is a pending or fault code the cruise wont engage also the
Question about Chevrolet TrailBlazer
know what I'm doing, but this has me baffled. Exhaust flow seems fine (converter not plugged). Did the basics, checked for loose or corroded connections, scanned the computer for pending codes
...be bad? P0304 means that you have a misfire on cylinder #4.Pending code are secondary indicators to let the mechanic know that the problem is more or less constant even if it is a random
i have a pending p0306 code I know its a misfire on cylinder #6 but what is the pending part about. I replaced plug injector and coil pack. what do I try next?? Folks, operative word here is pending.
Question about Chevrolet TrailBlazer
...pending. I know one is a trans cooling sensor code or somthing of that nature I am thinking that might have to do with the jerking please help! THE INTERMITTENT SIGNAL FROM THE DEFECTIVE CRANK SENSOR ...
Question about Cars & Trucks
on. was t 5.4 litre engine can still check it with the proper scanner that shows current & pending codes. Have it scanned for free at most auto parts stores. Let them know it can be a pending code
...pending codes, new fuel pump. x engine code, 137,000 miles truck suddenly started using two and a half times as much gas as normal. no fuses blown. Underneath the plenum is the fuel injection module. ...
...engine.When engine warms up the light go off,is therea problem Check to see what the code is,It will probably be a pending code. Let me know wat the code is. It could be low oil or low oil
...off check engine light you have to remove it with a scan tool/programmer,because it has stored a pending code or a stored code to let you know it has detected a problem in its premitors of ...
Question about Cars & Trucks
know how to do that. I replaced my EGR Valve as that is the only DTC error I was receiving at the time. Upon replacing, all monitors looked good, but autozone advised that I clear the error codes that
5,006 questions posted
Usually answered in minutes!
2,541 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions