...fuel pump on a chevy s10, 2001, the truck was running fine and when we left the diner it did start and then when i put it into gear it died, so i had to have the truck towed home, and was told that ...
...fuel pump no power to fuel pump i also have blown fuse for ecmb that blows as soon as i replace it ECM B fuse supplies a constant 12v hot at all times to the VCM/PCM and to the fuel pump relay. The ...
...fuel pump. replaced fuel pump on my 99 s10 automatice 6cyl by removeing bed. Had power prior to removal now no power to the grey wire at pump. any ideas? Tested grey wire again but this time used the ...
...fuel pump had recently been replaced. the connector to the sending unit was different from original . the new pump included the different connector ,but it had to be spliced in .Check connections at ...
fuel pump fuse keeps blowing I'd be looking for a wire rubbing on the frame or tank. Easiest way to fix it would be to splice into the power wire under the cab as close to the firewall as you can get ...
Question about Chevrolet S 10
...fuel pump is not running replaced pump switched relays still not getting fuel Bad ground is the most probable cause. At the tank plug, find the black wire and splice into it and run a wire to the ...
fuel pump was making wierd noise for a while one day it stopped a guy helped me out by banging on the gas tank under side it ran for a while but croaked on the way home about 3 weeks later how much to
...fuel guage. If you try and replace the pump only, there is a chance of damaging some of the other components such as the sending unit. You also have to do some wire and hose splicing to connect the ...
Question about Chevrolet S 10
...fuel pump and i keep blowing the #20 ignition fuse On the chevy truck fuel pumps the plug at the end of the wires that attach to the pump go bad. Cut off and splice in a new one . cost about ...
2,062 questions posted
Usually answered in minutes!
904 Questions
790 Questions
747 Questions
686 Questions
620 Questions
