1998 Chevrolet S-10 Pickup "replace turn signal housing" Questions

Ad

Question about Chevrolet S 10

1 Answer

...turn signal I can not out how to remove the left housing unit on my s-10 pick up to replace the bulb there should be screws on the sides, drop the tailgate and look on the side of the tail lights ...

Ad

Question about Chevrolet S 10

1 Answer

turn signal post washer pump turns on with no problem even during these episodes Yes this is an issue on many Chevys with no recall. MOST of the time the problem you are describing is the wiper motor

Ad

...replace the entire ignition how to remove the steering out of the way Ignition Switch - REMOVAL & INSTALLATION (see Figure 1) Disconnect the negative battery cable. Remove the lower column trim ...

Question about Chevrolet S 10

2 Answers

...turn on all 4 lights on high beam do you? that thing screwed my whole headlight system up, I ended up throwing it in the trash. I have the chiltons and haynes manual, I'm sure between the two we'll ...

...housing. It’s easier with the tilt down all the way. The rubber cover on the lower cover will hide the cut. Next remove the small white connector from the top of the metal, key “tumbler”. Rotate the ...

Question about Chevrolet S 10

1 Answer

...replace the front turn signal bulb located on a 1996 Mercury Grand Marquis? you may be able to access the bulb housing under the hood. open the hood and look behind the turn signal for the bulb ...

...replace turn signal bulb The turn signal bulb is in the inside of the housing. You change the turn signal bulb from under the hood. It is up on the back of the housing. It twists a little ...

Question about Chevrolet S 10

2 Answers

...replace turn signal bulb need to replace turn signal bulb driver side Front YOU HAVE TO THE FRONT HEADLIGHT HOUSING TO REPLACE THE TURN SIGNAL BULB. right behind the signal light underneath the hood ...

Question about Chevrolet S 10

1 Answer

the park and turn signal bulbs are located in the bottom of headlight housing. Twist the bulbholders out to replace the park or turn signal bulbs. Installation is the reverse of the removal directions

Question about Chevrolet S 10

1 Answer

...have to be removed . Pull out the wheel house . Remove turn signal & driving light cover held on by 6 # T10 torx screws . Twist out socket & replace bulb # 3757NAK . Should take about 45

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

2,062 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...