1998 Chevrolet S-10 Pickup "clutch slave cylinder bleeder screw" Questions

Ad

from slave cylinder First open bleeder screw and drain clutch fluid.While slave cylinder is in place,loosen hydraulic line,then remove bolts holding cylinder to transmission,then remove hydraulic line

Ad

Question about Chevrolet S 10

1 Answer

...clutch peddal wont go down. its like it is jammed Try to bleed system from the slave cylinder. If the pedal will go down with bleeder screw open the master and slave cylinders are ok and you have ...

Ad

Question about Chevrolet S 10

1 Answer

...clutch slave cylinder. It will be bolted to the clutch housing. Locate the small bleeder screw near where the hydraulic hose connects to the slave cylinder. Step 4 Connect a length of clear plastic ...

clutch fluid onto a painted surface. Remove the bleeder cap from the slave cylinder and attach a vinyl hose to the bleeder screw. Place the other end of the hose in a container. Slowly pump the clutch

Question about Toyota Cars & Trucks

1 Answer

slave cylinder and clutch still loses pressure bleed slave cylinder of air. to do this let someone pressdown and hold on the clutch pedal, open bleeder screw let air escape close bleeder screw release

...CLUTCH BLEEDING 1993 CHEVY TRK 2500 ,AFTER REPLACING THE LINE raise and support vechicle safely.remove slave cylinder.hold slave cylinder at a 45 degree angle.with bleeder screw at it highest ...

...clutch on a 1991 jeep wrangler 1. Fill master cylinder reservoir with DOT 3 brake fluid. Raise and support vehicle. Attach bleeder hose to bleeder screw on bleed line of slave cylinder. See Fig. 1 ...

Question about Chevrolet S 10

2 Answers

...clutch mater and fill with fluid and then open slave cylinder bleeder screw and let it gravity bleed( run out by itself) When it does close bleeder screw and you should get pressure.(make sure master ...

slave if not try to hold the clutch pedal in overnight with a stick or something take the cover off the master for the slave so air can escape thru the top goodluck The bleeder screw is located on top

Question about Chevrolet S 10

1 Answer

...clutch slave cylinders have a bleed screw,one pipe in,the other hole is the bleed screw hole,should be tapered at the bottom,for the screw to deal against,also sits above the pipe,to let the air ...

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

2,062 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...