...car so they can get you the right size,,, to install drain radiator,, you will have to drive the old freeze plug in and leave in the block or try to pry it out ,,,i have left them in does not hurt ...
...time to replace freeze plugs is when the engine block is out of the car and up on a stand. If this is not an option then digging in and replacing that one leaking freeze plug may be the only
How to replace rear freeze plug 1993 Chevy V6 S10 4.3 liter You will have to pull the trans to get to the freeze plug. Take a punch and knock one side of the plug in then pull the rest of the plug out
...s-10 blazers freeze plugs located? Hello: Freeze plugs at the end of each head. The main freeze plugs are in the block on the side. To access them you may have remove the engine mounts,
freeze plug before you tap it in. Not only should you change them both on the right side but check and possibly need to replace on the left side. There are two plugs on each side and if one is leaking
...plugs holes. what exactly caused the freeze plug to come out if it froze hard enough to push out freeze plug then it most likely has caused other damage the only way water is coming out of plug holes ...
...freeze plug they have these at any auto parts store. if you can put your finger on the hole where the plug came out from you may be able to push a rubber plug back in. ive done this twice on my car. ...
i have a 4 cyl s10. and i replaced the water pump cause it had been leakin. right before i cranked it. i put 1 gallon of antifreeze and half of water. then i started it and it started leaking anti ...
i need to find the freeze plugs on a 2000 chevy s10 4.3 litre There are freeze plugs in the heads at both ends, also on the sides of the engine block below or behind the exhaust manifolds.
water leak s-10 v-6 engine block above moter mount Sounds like freeze plug or head gasket. check your freeze plug
2,062 questions posted
Usually answered in minutes!
904 Questions
790 Questions
747 Questions
686 Questions
620 Questions