1998 Chevrolet Malibu "ac system charge" Questions

...feet. below alternator. it is just about impossible to charge system from top, because alternator is in the way while running. the best way is to charge ac from the bottom, or a long ac hose from

...to provide cold when it is turned on have the AC system checked for a low charge of refrigerant due to a leak in the system. If it islow it is likely the AC compressor front shaft seal is

...AC machine by a certified tech. There is moisture in the system, what refrigerent that is in there should be recycled then a vacum to get it out, it also takes some ofthe old oil out and new put back ...

...AC is fully charged The only way to know if a vehicle's air condition is properly charged is to use refrigerant gauges to determine the high side and low side pressure while the system is running. ...

It maybe low on freon. I hope this helps! Had the same problem after having the system checked, it was the ac compressor switch not allowing it to stay engaged, thus not blowing cool air all the time

...ac system. its possible that the previous owner charged the ac to help sell the car. most newer cars have a sort of safety switch to protect the compressor from damage. if the ac pressure is too low, ...

...ac system I'm trying to recharge the AC in my 1997 Chevy Malibu. What port do I connect the charging unit to? the low side port is up against the firewall, just behind the drive belt. the port is on ...

...AC voltage is converted to DC by the rectifier bridge and is supplied to the electrical system at the battery terminal. When the engine is running, the generator turns on a signal to the generator ...

Same ac light on and off blowing only hot air 2003 if the a/c light is blinking on and off and will not let the a/c come is usually an indication of the a/c system not fully charged with freon

...ac system Just go to Wal mart or a parts store and buy about three large cans maybe four of AC Pro it comes with its own hose and everything. Set the gauge on can to the outside temp , attach to low ...