1992 Chevrolet Caprice "2006 chevy truck trailer light" Questions

...2006 chevy colorado the max is 4,000 LBS, but that will really strain the engine, but the brakes and trans can handle it. I'd recommend that you keep it on the light side of 2000 lbs. You will need a ...

2006 chevy trailer tail light fuse? I was wondering if there is a separate fuse for the trailer tail lights, all other lights work on the trailer but the tail light stopped working, the problem is ...

trailer and 4 plug works fine, checked w/adapter 4 to 7 and have lights, when plugging into vehicle, no running lights. Is the seven plug on the vehicle wired correctly?? I did check the legend on the

...2006 chevy silverado don't work. Third brake light works and can't find a blown fuse. Tried new light bulb too. If it has a trailer harness ,check this harness,you may need to replace it. I had the ...

2006 chevy 2500hd won't run right blinker on trailer its works on other truck, lights work, but don't blink, everything works except right blinker. It works on truck. If you look in the under hood ...

chevy tahoe 2006 z71 i am having problems with my rear lights both lights blink when i put the turn signal on one less light than the other the lights on the dash indicating the turn signal flicker ...

2006 chevy trailblazer heater blower motor not working I have a 2006 chevy trailblazer 6 cylinder 4.2L. Evedrything was working properly and I had to tow a trailer with only a 4 wire harness so i got ...

...2006 chevy truck, 4.8L 2wd The brakes lights on my truck will not work when i press my brakes. The tail lights work on the top but the bottom tail lights does not work. The third brake light works, ...

...2006 chevy van for the first time I turned a corner and lost all lights and instrument panel. I checked fuses, relays. ok Tail lights and instrument panel lights are working now but I still have no ...

2006 chevy express van, I am trying to wire up lights for a trailer. I have brake lights, turn signal lights but no tail lights? All lights and wiring are new. Check for power at the splice/connector.