replace fuel sending unit It is a fuel sender and fuel pump module all in one unit. The fuel tank needs to be dropped out to change this.
...NEED TO KNOW HOW TO REPLACE THE SENSOR AS I HAVE CHANGED THE FUEL PUMP & THE DASH CLUSTER AND STILL DOES NOT WORK? The sending unit for the gauge would have been attached to the fuel pump in the
...fuel light works. problem sending unit (how hard to change), gauge, or other? The sender unit has a fine resistance wire with a slider to read the level, the slider or wires are worn and making ...
...It sounds like the sending unit in the tank is bad. replace your feul pump relay usally in the gas tank and you should just change the fuel pump also ( your there and got the tank down any way
gas guage is never accurate Need to replace the sending unit in the tank i would goahead and change the fuel pump also while i had the tank out.
...since then my gas gauge is not gauging the gas correctly- I The sending unit in the fuel tank most likelt went bad. It is probably a coincidence that it happened at the same time as the oil
changing the fuel filter shortly after. All that broken up gunk has to go somewhere!!! Easy to do and cheap. An alternative for a temporary solution is to pull the fuel level sending unit and clean it
...fuel level sending unit, located inside the tank connected to fuel pump assembly. Theres a possibility that you have a ground issue. So check that first as its easier. If the grounds check out then ...
...sending unit on the thermostat (?) and the Fuel Pressure Limit Switch and nothing has helped. It is letting too much gas into the engine also. Any ideas? The garage called a week ago and thought they ...
...fuel sending unit or also called fuel level sensor.To fix this problem the fuel tank has to be droped down and the pump pulled out.Its not to hard to do but remember you are dealing with gasoline 1 ...
1,317 questions posted
Usually answered in minutes!
921 Questions
813 Questions
785 Questions
687 Questions
554 Questions