1993 Buick LeSabre "wd 40 used starting fluid" Questions

Ad

Question about Cars & Trucks

4 Answers

WD 40 to clean an Alternator that has oil or power steering fluid that got into it after the Alternator has been removed from the vehicle. I don't think WD 40 will conduct electricity, is this correct

Ad

backfiring into the intake, and fire. Any of the above may have happened. I like to use wd-40 as starting fluid in my deisel engine. Starting fluid is bad for a deisel engine, espically the newer ones

Ad

Question about Buick LeSabre

1 Answer

...WD-40 and let it soak in, brake fluid also works like WD-40 but make sure the manifold is not so hot that it will burst into flame. Another way is to remove the two front bolts from the endine cradle ...

...wd 40 on the joint that goes into the rubber plug into the gearbox but it may have gone in the rubber plug then i lost my clutch entirely but i started it up took the cap off the clutch fluid ...

...hoping its the coil or disturpitor any ideas Try using some water displacing fluid....I use wd-40.spray the sparkpulg wires and any other ignition components you can find. hope this

Question about Buick LeSabre

3 Answers

...WD-40 ON THE THROTTLE BODY. THAT IS STARTER FLUID THAT YOU SPRAY ON THE THROTTLE. BUT ID STILL CHECK THE SPARK PLUGS TO SEE IF THAT WORKS. Don't spray anything into the throttle body. It will damage ...

...are we looking at here my 2007 toyota tacoma did that and it was rusty universal joints in the steering column banged on them with a hammer and sprayed down with wd 40 been 2 yrs now stll ok ...

...WD-40, Carb cleaner, starting fluid, etc.) or gas (propane, MAPP gas, etc.) will result in an increase in rpm when the leak is covered. Smoke is very useful when it blows OUT but hard to see when it ...

WD-40, bolts loosened then tightened. The squeaking will stop for just a few minutes then it starts again. Now she is having trouble with the power steering. It's getting hard to turn. Any suggestions

...puts water in electrical connections ,coil/s injector terminals and HT leads and ecm connections. Use dewatering product(WD-40) and spray all the electrics and distributor cap to remove the

Not finding what you are looking for?
1993 Buick LeSabre Logo

963 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...