...rear brake caliper piston doesnt push back, it takes a specail $7 tool from Auto Zone or other part store, the caliper piston screws back into the caliper. pushing it back may damage the caliper, be ...
...rear caliper on the reare brake. i am try to change brake pads. is trhere a bolt to release the pressure u better stop before u do something wrong the brakes is not something to play with and u may ...
...screw and let it drip a little . gravity bleed. Did you turn the read caliper piston in and then press it down? The rear piston must be aligned with the pad. Did you pump the parking brake to
...rear brake pads on 2002 buick lesabre how do you remove the rear brake caliper, bottom has bolt to remove, top bolt doesn't have a way to remove, does it hinge on top bolt? most have top and bottom ...
...rear caliper pistons. You may want to rent the tool. If you look at the piston you'll see one or two notches. The special tool has nipples to fit these notches. The caliper piston will have to be ...
Question about Buick LeSabre
...ago and the ABS light is NOT on. What to do? Sounds as if the back bracks are so worn the wheel calipers are sticking or some brake part has failed. Tear down rear brakes to see what has
...rear wheels.apply parking brake.when loosen axle nut.its more easier to leave wheel on.let vechicle weight hold wheel from turning while you loosen axle nut.you need to get a 1/2 break bar or large ...
...rear disc brakes and can not get the caliper piston to push in. Do I need a special tool? I am using a c-clamp. the rear pistons need to be turned and pushed in at the same time, and yes there is a ...
...brake parts, always change that part on both sides. Just to Repair the Rear End You are looking at Probably 1000 to 1500.00. Minimum. The Body work could get in the Way of the Tire also. Probably ...
963 questions posted
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
897 Questions
