...Anti-Theft System. this would explain the security light. the way the system works is that the chip (or pellet) in the key has a certain resistance value,when you put the key in the ignition the ...
need a new steering column because it didnt recognise the keys. Did that put a new one on and the car still wont turn over, but if you by pass the security it will turn over but cut off. What should i
anti theft system) sooner or later have trouble reading the key resistance due to wear on the key and the ignition switch. Your solutions are relative to your abilities and finances. 1. Most expensive
Question about Cars & Trucks
...anti-theft system needs reset? I just replaced the steering column in my 2006 chrystler town and country. The new steering column came with a key, (of coarse already cut and programmed because its ...
Question about Buick LeSabre
anti theft system, I was wondering if you could contact me so i can ask so in depth questions on the solution that worked to fix the problem. I called around and can't afford to take it to a dealer so
...anti-theft devise from GM, inside the ignition key is a micro-chip, when you insert the key in the ignition cylinder, the sensor inside the cylinder will measure the resistance of that micro-chip ...
Question about Cars & Trucks
...that mean Anti theft on with your remote try unlucking the door or with your key unluck the passager door the key your using its not a valet key you need to use the original key with the chip ...
...a bad PCM, bad SKIM (anti theft module) or the SKIM needs to be reprogrammed. You are best advised to have it towed to the dealer or a reputable garage with experience in anti theft systems on
...need a chip in the key to start? 1995 Regal has a factory "anti theft" type device. The way it works is the ignition key has a resistor built in, if you try to start the car without the correct key ...
Question about Mercedes-Benz Cars & Trucks
...need to find a way to get it started without a key Immobilizers are designed to prevent what you are needing done. There is no easy way around it. Your best bet is to call a lock smith to cut you a ...
963 questions posted
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
897 Questions