1999 BMW 323 Series "bad caliper cause traction light" Questions

Ad

Question about BMW 323

1 Answer

bad wheel bearing.will make noise and mess with sensors,or if had a brake job done caliper maybe loose to cause noise,if a drum which most are not you have parts rolling around in it,have seen it all.

Ad

...bad caliper pistons, bad rotors, or caliper guide pins seized, and all I told are a danger to all if ignored. yes a wheel sensor fails sure, but we just scan it and none show up there those are ...

Ad

...bad hub can cause the two trouble lights to pop also bad sensor but if the brakes were smoking then besides abs problem looking at a brake problem as well possible damaged pad or caliper freezing ...

...bad breaks, like say stuck caliper piston or seized caliper guide pins or warped or cracked rotors Inspections DEEP is the next act.. p03nn errors are detected by piston ./rod/crank acceleration ...

Question about BMW 323

1 Answer

...traction system) light has come on along with the check engine light. What can I do to fix this myself? Nothing seems to be wrong with the car. This is usually caused by a bad wheel speed sensor that ...

Question about BMW 323

1 Answer

...bad PCM cause all this? The simplest things can cause the most trouble - I would start with a load test on the battery - may seem to be charged after using a battery charger, but can have plate ...

...Traction Control. I bet is bad on yours. I replaced mine on my car and fixed that problem. The part is like $100 in the local Auto Zone. Is held by 3 Bolts that comes off from the back of the Hub ...

caliper and had to bleed brakes. how on earth would the blind know what is wrong.? scan it? yet? btw, newer cars cut cruise feature for any signs of danger. new laws... the traction needs ABS to work

...cause intermittent grabbing, which would make that wheel vibrate.A bad wheel bearing is another possibility; the bearing may intermittently lock up under the decelerating force from braking. In this ...

...bad, then remove the wheel and take out the sensor by hand. Look in the hole in the wheel hub and inspect the wheel magnets for any damage or corrosion. This can be replaced if damaged. Apply a small ...

Not finding what you are looking for?
1999 BMW 323 Series Logo

762 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 BMW 323
2000 BMW 323

13 Questions

1998 BMW 323 Ci
1998 BMW 323 Ci

5 Questions

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...