...stripped lug nut with a hammer and the grip on the lug nut gets tighter as you loosen the nut. As long as the lug nut studs are ok, you should be able to just replace the stripped lug nuts. You can ...
rear brake line: stripped 11mm nut that is attached to wheel cylinder, how do i remove the stripped nut to replace the wheel cylinder take vicegrip and pull it while you turn the nut
Question about Mitsubishi Outlander
...we are replacing trying to take off front nuts holding starterin place nut is rounded and stripped wont come off go to a parts store and buy what they call turbo sockets sears sells them as ...
Question about Mitsubishi Outlander
...nut that you unscrew to drain the oil, for oil changing. It is stripped to hell, and i have tried "Gator Grip", fairly large plyer, and typical wrench, use vice grips they lock on tight or a pipe ...
...nut and a stripped locking lug nut and i cant break neither one losse what should i do If you have a socket you are willing to destroy, Find a socket that is as close to the size of the lug nut, but ...
Question about Cars & Trucks
...stripped then there is a strong possibility the Studs also are worn down. New nut will not correct this condition. It is best to replace the Wheel studs also. Cost of Wheel stud and nut is not much ...
...side of new snow scoop. Screw head stripped, screw goes through plastic wheel then washer and nut. Can't hold screw to get bolt off. Need way to separate screw from nut. TAP AND DRILL IT
...nut is stripped. I tried a gator socket but The nut is stripped. I tried a gator socket but it just doesn't grip. Any suggestions? Nut that holds what part together? Have you tried a stripped nut ...
Question about Mitsubishi Outlander
stripped. You will have to try and pull the plug out whilst turning it. Get a pair of vice grips or similar on the plug across 2 of the flats on the nut and pull on this while turning the plug with an
...nut is stripped enough is to grab a socket one size down from the size of the nut and hammer that ****** onto the stripped nut and then twist it off. Or your third option would be to cut em off and ...
236 questions posted
Usually answered in minutes!
561 Questions
200 Questions
132 Questions
107 Questions
83 Questions