1996 Volkswagen Jetta "timing belt marks cam" Questions

Ad

Question about Volkswagen Jetta

1 Answer

timing belt no timing mark on cam gear, how to find for 2003 jetta deasel There definitely is a mark. I'm tearing down a 99 Beetle now. The mark is on the center of one of the teeth and runs the ...

Ad

Timing belt was very loose so i changed the timing belt tensioner pulley.I tried to make sure and not move the timing belts position on the cam and crank but now im not sure if it may have moved.I ...

Ad

...timing gears for a 1987 Jetta 1.8 8V. Remove tappet cover and turn engine till the lobes on the cam shaft at no.1 cylinder are facing upwards and not pushing on the lifters.The cam gear has a little ...

...timing belt and water pump in and can't get this to work. I have the distributer off as well and its lined up to be at TDC also. try it and see .. get a printout of the timing marks from the parts ...

timing mark isnt exactly lined up. its half way. if i move it one belt cog, it will be half way out the other direction??? this is on a 2003 jetta 1.8T. The mark is not at the bottom or the top of the

Question about Volkswagen Jetta

5 Answers

...timing of a vw jetta 3 Get no.1 piston at tdc(top dead center)with cam at firing no.1 piston.fit your cam belt.and check your timming marks.Crank pulley marks and cam pulley marks.If you tell me what ...

Question about Volkswagen Jetta

1 Answer

...timing belt how i need to do, to put the timing belt, where is the mark on the correct place? there should be a mark on the cam that you line up with the top of the valve cover and then another one ...

timing belt failure/head swap, how to tell a 94, 1.9L is at TDC? Marks on flywheel at tdc, pump timed with pin tooling, aside from cam lobes #1 both "up", I'm lost. Turn over by hand but valve contact

Question about Volkswagen Jetta

2 Answers

...timing belt I have a 1997 2.0L Volkswagen Jetta. We are replacing the water pump and the concern is having to move the timing belt. What are the proper settings for this, if we need to reset it? Do ...

Question about Volkswagen Jetta

1 Answer

...timing belt broked and now im traing to get the engin on time There is a very good chance you bent some valves when the belt broke. If it's a 1.8 turbo then definitely, 2.0 you have a small chance ...

Not finding what you are looking for?
1996 Volkswagen Jetta Logo

1,296 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...